// Design and developmentMUNICIPAL
MUNICIPAL
EQUIPMENT
04 
// Products from the field of municipal equipment
LADDER
We produce fixed ladders for entrance shafts made of stainless steel of various qualities with our own walking plate according to the SIST EN 14396: 2004 standard. Ladders are 0.8 m - 5 m long with an optional support pull-out pole to help with entry to the shaft. Ladders longer than 5m are made by pre-order.
Technical specifications
| Material | W.Nr. 1.4301 / W.Nr. 1.4404 |
| Height | 800 – 5000mm (other dimensions on request) |
| Dimensions | 440 x 40 x L mm |
| Options | Pull out support rod, removable ladder extensions |
BASKET
Basket for pumping stations: A lifting basket where we can have larger unwanted items on the inflow. The basket acts as a coarse filter that keeps larger pieces at the inlet to the pumping station. With the help of a construction elevator, it is lifted to the surface along the guides, where the captured objects are automatically emptied into a container, which is located outside the pumping station. Baskets are custom made for each pumping station and made of stainless steel. The length of the guides is arbitrary.
Technical specifications
| Material | W.Nr. 1.4301 / W.Nr. 1.4404 |
| Load capacity | 100kg |
| Length of guides | 2m – 12m |
Overall dimensions of the structure | 1860x1160x3012mm |
| Overall dimensions of the basket | 510x300x510mm |
| Spacing between slots | 22mm |
LANDING
We custom-make all types of platforms for pumping stations and water tanks from stainless steel.
Technical specifications
| Material | W.Nr. 1.4301 / W.Nr. 1.4404 |
| Load capacity | 100kg |
PRESSURE LINE
We weld stainless steel pressure line of various qualities. Lines are custom made at project requirements.
Tehnical specifications
| Material | W.Nr. 1.4301 / W.Nr. 1.4404 / W.Nr. 1.4571 |
| Pressure | PN10 – PN64 |
| Measure | flange joints (flying flanges / throat flanges), |
| Sealing | EPDM gasket, EPDM gasket with metal ring, PTFE |
| Screw connections | A2 or A4 quality screws |
DOORS
Stainless steel doors in various qualities in dimensions 2000 × 1000 and 1600 × 1000. We also make any other desired dimension according to the customer's wishes. The door is intended for entry into dry areas of underground cisterns and reservoirs. The door has ventilation slots, a seal on the frames and a cylinder lock.
Technical specifications
| Material | W.Nr. 1.4301 / W.Nr. 1.4404 / W.Nr. 1.0038 |
Built-in dimension | 2000x1000mm/1600x1000mm / custom |
| Lock | Cylindrical lock |
| Vent | Built-in grille or slot formation |
| Filler | Extruded polystyrene (styrofoam) |
| Sealing | Door seal NBR |
| Surface treatment | Painting, powder coating or sanding |
AIR VENT
Different types of vents that can be attached to a flange, embedded in composite tanks or welded to covers. Vents for installation in drinking water reservoirs have a built-in fine insect screen.
Technical specifications
| Material | W.Nr. 1.4301 / W.Nr. 1.4404 |
| Height | 300mm – 250mm |
| Measure | DN32 – DN250 |
| Installation | Flange screwing / welding |
Additional options | Insect net |
COVER
Stainless steel walking coversin hexagonal, square or rectangular shape, up to 1000 × 1000mm in size.
Technical specifications
| Material | W.Nr. 1.4301 / W.Nr. 1.4404 |
| Shapes | Hexagonal for round inlet shafts |
Dimensions (light measure) | Ø800mm, Ø1000mm, custom |
Possibility of installation | Screwing directly to shaft / flange |
| Lock | Cylinder lock / hanger lock (standard) |
Opening assistance | Gas spring; stainless or classic |
Additional options | Air vent |
// We are at your disposal 24/7